Filters
Competition Cams 11-220-4
Magnum/Magnum Marine 260/260 Solid Flat Cam for Chevrolet Big Block 396-454; Jet boat with B impeller. Bracket race, 10.5:1+ compression. Use tunnel ram.
Competition Cams 1222-1
High Energy Rocker for '81-'87 Chrysler 2.2L Overhead Cam; Perfect for stock or High Energy camshaft equipped engines, our High Energy rockers eliminate slop and feature a long slot for high lift cams. This 1222 rocker fits '81-'87 Chrysler 2.2 liter overhead cam engines.
Competition Cams 127050
XFI NSR 214/227 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve; Great upgrade for stock engine. Solid power gains above 4700 RPM, compatible with stock springs. Works with stock tune.
Competition Cams 15850-16
Short Travel OE-Style Hydraulic Roller Lifter Set for '87+ SBC and LT/LS; These non-link bar short travel hydraulic roller lifters feature a short travel. These lifters' short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chevrolet Small Block.
Competition Cams 1838-16
Ultra Pro Magnum XD Rockers w/ 1.8 Ratio for Ford Boss 302, 351C, 429-460 7/16"; FC, 7/16" Stud/1.8" Ratio, XD Rocker Arms - Set of 16
Competition Cams 32-219-3
High Energy 212/212 Hydraulic Flat Cam for Ford 351C, 351M-400M; Great mid-range torque for towing. Good power at low speeds. Smooth idle.
Competition Cams 4775-1
ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4775 features a 1.540" OD and a .640" ID that works well with our 996, 998, 26099 and 991 dual valve springs.
Competition Cams 744-1
7 Degree Steel Retainer for 3/8" Valve w/ 1.437"-1.500" Spring; Precision machined from chromemoly steel then black oxided, this 7 degree retainer is designed specifically for 3/8" valve engines with a 1.437"-1.500" outer diameter valve spring like our 984, 990, 972, 901, 988 and 950 springs.
Competition Cams 7762-1
Hi-Tech 210 Radius 8.100" Long, .080" Wall, 5/16" Diameter Pushrod; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. This 5/16", 8.100" long Hi-Tech pushrod has a 210 degree tip radius for a greater load bearing surface.
Competition Cams 7930-16
Hi-Tech 6.850" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 6.850" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8279-1
Dual Taper 7.550" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 7.550" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
