Filters
Competition Cams 12-223-4
Magnum 236/236 Solid Flat Cam for Chevrolet Small Block; Good power for street, choppy idle. Needs 2500+ stall, likes headers and low gears.
Competition Cams 15853-2
Short Travel Retro-Fit Hydraulic Roller Lifter Pair for Chevrolet Small Block; These short travel retro-fit hydraulic roller lifters feature short travel. This lifter pair's short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chevrolet Small Block.
Competition Cams 18-415-8
Magnum Computer Controlled 210/215 Hydraulic Roller Cam for Chevrolet 262/4.3L; Works with throttle body and sequential port injection with aftermarket chip. Good low end, mid-range.
Competition Cams 21-247-4
Magnum 236/236 Solid Flat Cam for Chrysler 383-440; Excellent for street/strip. 383 needs 2800 stall. 440 use 2400 stall, 700-800 CFM carb and headers.
Competition Cams 32-224-4
Magnum 224/224 Hydraulic Flat Cam for Ford 351C, 351M-400M; Great for mild street machines. 2000+ stall, 3.30-4.0 gear, headers. Mild rough idle.
Competition Cams 4776-1
ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4776 features a 1.550" OD and a .570" ID that works well with our 928, 944, 26089 and 955 springs.
Competition Cams 59100
Quiktyme 215/211 Solid Cams for Honda D16Z6 1.6L w/ V-TEC; Great street cam for increased power and torque with efficiency. Works with stock components.
Competition Cams 7763-16
Hi-Tech 210 Radius 8.500" Long, .080" Wall, 5/16" Diameter Pushrod Set; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. These 5/16", 8.500" long Hi-Tech pushrods have a 210 degree tip radius for greater load bearing surface.
Competition Cams 7931-8
Hi-Tech 8.280" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8; Hi-Tech 8.280" Long, .080" Wall, 3/8" Diameter Pushrod - Set of 8
Competition Cams 8280-16
Dual Taper 7.600" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 7.600" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 8695-1
Dual Taper 9.900" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 9.900" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
