Filters
Competition Cams 2900-1
Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac; This Performance Series solid lifter features a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For applications with .842" lifter bores.
Competition Cams 32-234-4
Magnum 244/244 Hydraulic Flat Cam for Ford 351C, 351M-400M; Street/strip use with 3000+ stall, 10:1 compression, low gears. Racy idle.
Competition Cams 4777-1
ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4777 features a 1.540" OD and a .640" ID that works well with our 26089, 955 and 943 dual valve springs.
Competition Cams 513-12
Set of 12 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem; COMP's Positive Stop PTFE valve seals offer more clearance for dual springs with better sealing than o-ring or umbrella seals. These 513 seals have a .600" outer diameter and fit applications with 5/16" valves and .600" OD valve guides.
Competition Cams 745-1
7 Degree Steel Retainer for 3/8" Valve w/ 1.437"-1.500" Spring; Steel Retainer for #26120
Competition Cams 7765-1
Hi-Tech 210 Radius 8.600" Long, .080" Wall, 5/16" Diameter Pushrod; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. This 5/16", 8.600" long Hi-Tech pushrod has a 210 degree tip radius for a greater load bearing surface.
Competition Cams 7933-1
Hi-Tech 6.900" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.900" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 828-16
Endure-X Solid Roller Lifter Set for Chrysler 273-360; Endure-X Solid Roller Lifters for Chrysler V8 273-360, .904" Diameter, Centered - Set of 16
Competition Cams 851-12
OE-Style Hydraulic Roller Lifter for Ford V6; OE-style Hydraulic Roller Lifter for Ford 5.0L and Ford Flat Tappet Engines - Set of 12
Competition Cams CL54-428-11
XFI RPM HI-LIFT 228/230 Hydraulic Roller Cam and Lifter Kit for GM LS GEN III/IV; High RPM street/strip camshaft for use with FAST LSX intake. Requires programmer.
Competition Cams K11-232-3
Xtreme Marine 218/224 Hydraulic Flat Cam K-Kit for Chevrolet Big Block 396-454; Biggest for inboard/outboard, good for ski, economy and performance.
