Filters
Competition Cams 12-231-2
Xtreme 4x4 206/214 Hydraulic Flat Cam for Chevrolet Small Block; Very strong torque, smooth idle, excellent mileage.
Competition Cams 127200
XFI NSR 222/235 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve; Solid power gains above 4900 RPM, compatible with stock springs. Works with stock tune. Best with 3.73 gear & 2500 stall. Great idle.
Competition Cams 15854XD-16
XD Short Travel Retro-Fit Hydraulic Roller Lifter Set for Chevrolet Big Block; These short travel retro-fit XD hydraulic roller lifters feature a billet seat and short travel. These lifters' short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chevrolet Big Block.
Competition Cams 2900-16
Performance Series Solid Lifter Set for Cadillac, Chevrolet, Olds and Pontiac; These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For 8 cylinder applications with .842" lifter bores.
Competition Cams 4777-16
ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4777 features a 1.540" OD and a .640" ID that works well with our 26089, 955 and 943 dual valve springs.
Competition Cams 51-314-4
Magnum Muscle 232/237 Hydraulic Flat Cam for Pontiac 265-455; Magnum Muscle for: 400c.i., 1968 RAM AIR IV, factory 366 HP, 400c.i., 1969, factory 345/370 HP, 455c.i., 1970, factory 370 HP.
Competition Cams 6507
Xtreme Duty Hi-Tech Belt Drive w/ Idler for SBC/Olds Rocket and 1.250" belt; Infinitely adjustable with a 1.250" thick extreme application belt, the Hi-Tech belt drive system for Chevrolet Small Block reduces flap through the RPM range while absorbing crankshaft harmonics to prevent valve train instability.
Competition Cams 745-12
7 Degree Steel Retainer Set of 12 for 3/8" Valve w/ 1.437"-1.500" Spring; Steel Retainers for #26120
Competition Cams 7766-1
Hi-Tech 6.450" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.450" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 7934-1
Hi-Tech 8.550" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.550" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8283-1
Dual Taper 7.650" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 7.650" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 8697-16
Dual Taper 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 10.000" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.