Filters
Competition Cams 11-240-20
Xtreme Marine NIT 234/244 Hydraulic Flat Cam for Chevrolet Big Block 396-454; Jet w/ A impeller, needs improved intake, likes headers. Nitrided.
Competition Cams 12-232-3
Xtreme Marine 212/218 Hydraulic Flat Cam for Chevrolet Small Block; Good for inboard/outboard pleasure boat, skiing and good economy.
Competition Cams 127205
XFI NSR Blower 222/239 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve; Mid to upper range cam for bolt-on blowers running higher boost psi. Major power gains above 4900 RPM, compatible with stock springs. Best with 3.73+ gears & 2500 stall. Great idle. Works with stock tune.
Competition Cams 15854XD-2
XD Short Travel Retro-Fit Hydraulic Roller Lifter Pair for Chevrolet Big Block; These short travel retro-fit XD hydraulic roller lifters feature a billet seat and short travel. This lifter pair's short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chevrolet Big Block.
Competition Cams 32-237-4
Magnum 224/224 Solid Flat Cam for 351C, 351M-400M; Excellent torque. Everyday performance. 2000+ converter and 9:1 compression. Noticeable idle.
Competition Cams 35-420-8
Magnum 215/215 Hydraulic Roller Cam for Ford 5.0L; Mild street performance. Slight lope at idle. Stock converter ok but best with 1800+ stall. Needs lower gears.
Competition Cams 4778-1
ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4778 features a 1.550" OD and a .570" ID that works well with our 938 and 927 dual valve springs.
Competition Cams 513-16
Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem; COMP's Positive Stop PTFE valve seals offer more clearance for dual springs with better sealing than o-ring or umbrella seals. These 513 seals have a .600" outer diameter and fit applications with 5/16" valves and .600" OD valve guides.
Competition Cams 6507B
74-Tooth Timing Belt for 6507 Xtreme Duty Hi-Tech SBC Belt Drive System
Competition Cams 745-16
7 Degree Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring; Steel Retainers for #26120-1
Competition Cams 7766-16
Hi-Tech 6.450" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 6.450" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.