Filters
Competition Cams 7938-16
Hi-Tech 7.100" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.100" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8300-16
Hi-Tech Oil Restricting 7.700" Long, .080" Wall, 5/16" Diameter Pushrod Set; With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.700" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 8704-1
Hi-Tech 9.950" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.950" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 943-1
Race Endurance 1.565" OD Dual Spring, 1.900" Installed Height, 1 Spring; Engine Valve Spring
Competition Cams 990-16
Engine Valve Spring; Single Outer Valve Springs: 1.437" OD, 1.073" ID
Competition Cams 4784-4
Spring Seats for VT908 Springs.; These seats are the same seats that are used in our 9702, 9703 and 9711 spring kits for our VT908 springs.
Competition Cams CL12-211-2
Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block; High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
Competition Cams CL32-235-4
Magnum/Drag Race 253/253 Hydraulic Flat Cam and Lifter Kit Ford 351C, 351M-400M; Bracket race/limited street use, 3500+ stall, 11:1 compression, radical idle. Good torque in heavy car. 3500+ stall or 4 speed, 10:1 compression.
Competition Cams CL64-247-4
High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chrysler 170-225 6 Cylinder; Great power in mid-range RPM. Good choice for trucks and tow vehicles. Smooth idle.
Competition Cams K11-302-4
Computer Controlled 212/218 Hydraulic Flat Cam K-Kit Chevrolet Big Block 396-454; For TBI with stock converter and exhaust upgrade.
Competition Cams SK11-456-8
Xtreme Marine 242/248 Hydraulic Roller Cam SK-Kit Chevrolet Big Block 396-454; Good for jet boat with A or B impeller in bracket racing or performance use.
Competition Cams SK32-421-8
Magnum 215/215 Hydraulic Roller Cam SK-Kit for Ford 351C, 351M-400M; Mild street performance. Slightly noticeable lope at idle. Will work with stock converter or even better with 1800+ stall and gear upgrade.
