Filters
Competition Cams 35-639-5
Oval Track 242/246 Solid Flat Cam for Ford 351W; Good in heavy car on short tracks. Works with stock manifolds.
Competition Cams 46-422-9
Xtreme Energy 218/224 Hydraulic Roller Cam for GM 8100/8.1L; Best in performance applications, aftermarket intake and exhaust recommended.
Competition Cams 4800-1
Raised 1 Piece Guide Plate for Chevrolet Small Block w/ 5/16" Pushrod 7/16" Stud; Hardened and black oxide coated for durability, this raised one-piece guide plate is designed for Chevrolet 265-400 Small Block engines with 7/16" studs and 5/16" pushrods.
Competition Cams 6018-1
Sportsman Intake Valve for Chevrolet Small Block w/ 2.055" Head, 5.011" Length
Competition Cams 701-32
Steel Retainer Set of 32 for GM 6.6L Duramax w/ 26113/26125 Beehive Springs; Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 26113/26125 Beehive springs on GM 6.6L Duramax applications.
Competition Cams 7785-1
Hi-Tech 9.100" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.100" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 7949-12
Hi-Tech 7.300" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12; Hi-Tech Pushrods: 5/16" Diameter, 7.300" Length
Competition Cams 831-12
Solid Lifter Set of 12 for Ford 240-300 6 Cylinder.; Designed and manufactured to the tightest tolerances, these solid lifters for Ford 240-300 6 cylinder feature an exactly milled oil meter band as well as precisely ground lifter faces.
Competition Cams 8551-16
Hi-Tech One-Piece 8.250" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.250" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8714-16
Hi-Tech 10.450" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.450" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 955-1
Race Endurance 1.565" OD Dual Spring, 2.000" Installed Height, 1 Spring; Engine Valve Spring
Competition Cams 954-4
2 SPRING ASSEMBLY, 1.536"; These springs work excellently in higher rpm street/strip and racing applications that have aggressive lobe profiles.
