Filters
Competition Cams 127500
XFI SPR 229/236 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve; Powerful cam with very rough idle, biggest cam to use with stock heads. Good midrange torque with incredible top end hp gains. Solid power above 4700 RPM. Spring/phaser upgrade and custom tuning required. 3.90+ gears and 3000+ stall.
Competition Cams 15956XD-2
XD Short Travel Link Bar Hydraulic Roller Lifter Pair GM LS, LSX, RHS, Warhawk; These short travel retro-fit XD hydraulic roller lifters feature a billet seat and short travel. This lifter pair's short travel allows for light pre-load and reduced oil for the highest revving lifter for factory, RHS, LSX and Warhawk LS.
Competition Cams 35-518-8
Xtreme Energy Computer Controlled 224/232 Hydraulic Roller Cam for Ford 5.0L; 2500+ stall, 3.55-3.73 gears, better heads, intake and fuel system.
Competition Cams 4783-16
ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4783 features a 1.540" OD and a .640" ID that works well with our 924, 925 and 939 dual valve springs.
Competition Cams 51-600-5
Thumpr 227/241 Hydraulic Flat Cam for Pontiac 265-455; High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Competition Cams 6004-1
Sportsman Intake Valve for Chevrolet Small Block w/ 2.020" Head, 4.911" Length; Sportsman Stainless Steel Valves
Competition Cams 68-235-4
Xtreme 4X4 210/218 Hydraulic Flat Cam for AMC/Jeep 199-258/4.0L; Good torque and excellent mid-range power. Best with lower gear ratios.
Competition Cams 749-12
10 Degree Superlock Steel Retainer Set of 12 for 1.500"-1.550" OD Valve Spring; Steel Retainers: 1.500"-1.550" Spring Diameter
Competition Cams 7774-16
Hi-Tech 8.325" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.325" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7940-12
Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12; Hi-Tech Pushrods: 5/16" Diameter, 7.200" Length
Competition Cams 830-2
Endure-X Solid Roller Lifter Pair for Chrysler 383-440/426 HEMI; Endure-X Solid Roller Lifters for Chrysler V8 383-440/426 HEMI, .904" Diameter, Centered, .140" Deeper Seat - Pair
Competition Cams 8706-16
Hi-Tech 10.050" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.050" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.