Filters
Competition Cams 127550
XFI SPR Blower 237/248 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve; Big power gains in mid to upper RPM range
Competition Cams 1601-12
Ultra Pro Magnum Rocker Arm Set w/ 1.52 Ratio for Chevrolet V6 w/ 3/8" Stud; These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, these rockers fit Chevrolet V6 with a 3/8" diameter stud.
Competition Cams 19004-12
Ultra ARC Rocker Set w/ 1.5 Ratio for Chevrolet 200-262 V6 w/ 7/16" Stud; Constructed in the USA after FEA analysis, the Ultra ARC rocker withstands up to 700 lbs pressure while improving power and stability. This 19004 rocker features a 1.5 ratio for use with 7/16" stud Chevrolet V6.
Competition Cams 35-560-8
Nitrous HP 232/244 Hydraulic Roller Cam for Ford 5.0L; Pro Street applications, excellent for 150-300 hp kits or large blower, computer modifications required.
Competition Cams 4611-1
Camshaft Bolt for Chevrolet V8 and V6; Chevy V8 Cam Bolt
Competition Cams 4785-1
ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4785 features a 1.550" OD and a .570" ID that works well with our 917, 919, and 943 dual valve springs.
Competition Cams 51-602-5
Big Mutha' Thumpr 243/257 Hydraulic Flat Cam for Pontiac 265-455; Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Competition Cams 6007-1
Sportsman Intake Valve for Chevrolet Small Block w/ 2.080" Head, 5.111" Length; Intake 2.080 x 11/32 + .200 Long
Competition Cams 689-421-13
XFI AFM 216/228 D, 214/226 N Hydraulic Roller Cam for GM LS GEN IV; Excellent responsiveness and mid-range power w/ across the board gains. Best choice for heavy vehicles w/ stock gears.
Competition Cams 749-4
10 Degree Superlock Steel Retainer Set of 4 for 1.500"-1.550" OD Valve Spring; 1.500-1.550 Steel Retainer
Competition Cams 7776-16
Hi-Tech 8.700" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.700" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7941-16
Hi-Tech 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.250" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
