Filters
Competition Cams 8544-16
Hi-Tech One-Piece 9.550" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 9.550" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8710-1
Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.250" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 947-1
Race Extreme 1.660" OD Triple Spring, 2.050" Installed Height, 1 Spring; Engine Valve Spring
Competition Cams 998-1
Engine Valve Spring; Dual Valve Spring: 1.625" OD Outer, .769" ID Inner
Competition Cams 6076-8
Stainless Intake Valves for GM LS1 4.894" Length; These valves are designed to be a performance oriented replacement for the factory LS1 intake valve. Its heavy-duty stainless steel construction will hold up to extreme engine conditions.
Competition Cams CL12-235-2
Xtreme 4x4 210/218 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block; Strong low end and mid-range torque, good idle.
Competition Cams CL32-541-8
Magnum 230/230 Hydraulic Roller Cam and Lifter Kit for Ford 351C, 351M-400M; Perfect for street machine. Best with 4 speed and 3.40-4.10 gears. Aftermarket intake, headers and 2500+ stall.
Competition Cams CL68-239-4
Xtreme 4X4 218/226 Hydraulic Flat Cam and Lifter Kit for AMC/Jeep 199-258/4.0L; Good mid to upper torque, needs increased compression, headers and gears.
Competition Cams K23-700-9
Xtreme Energy 236/242 Solid Roller Cam K-Kit for Chrysler 383-440; Best all around street roller. 9.5:1 compression with 2500+ stall.
Competition Cams K51-234-4
Magnum 230/230 Hydraulic Flat Cam K-Kit for Pontiac 265-455; Need Info
Competition Cams SK33-226-4
Magnum 224/224 Hydraulic Flat Cam SK-Kit for Ford 352-428; Good cam for stock and even better for 2000 stall converter in street machine, 9:1 compression, mild rough idle.
