Filters
Competition Cams 51-660-5
Drag Race 265/276 Solid Flat Cam for Pontiac 265-455; Excellent for 400-455, good torque. 4200+ stall.
Competition Cams 601-12
Hardened Steel Set of 12 - 7 Degree, 11/32", Single Groove Street Locks; 12 Pairs Steel Street Locks: 1 Groove, 7 Degree Angle, 11/32" Stem Size
Competition Cams 69-235-4
High Energy 212/212 Hydraulic Flat Cam for Buick 181-252 Even Fire V6; Ideal for towing. Strong mid-range power, especially at highway speeds.
Competition Cams 7780-16
Hi-Tech 8.850" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.850" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7944-1
Hi-Tech 7.250" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 7.250" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8306-16
Hi-Tech Oil Restricting 7.350" Long, .080" Wall, 5/16" Diameter Pushrod Set; With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.350" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 8546-1
Hi-Tech One-Piece 9.700" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 9.700" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8711-1
Hi-Tech 10.300" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.300" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 94-801-10
Xtreme Energy 230/236 Hydraulic Roller Cam for Cadillac 425, 472, 500; Best all around high performance hydraulic roller camshaft for modified 500c.i. engines with high compression, converter and gears.
Competition Cams 999-1
Engine Valve Spring; Dual Valve Spring: 1.550" OD Outer, .724" ID Inner
Competition Cams 646-200-13
FSL 208/220 D, 206/218 N Hydraulic Roller Cam for GM LS2/LS3 GEN IV; 50-state legal grind for GM L92 Gen IV singlebolt w/ AFM. Works with stock components and tune, can produce 32+HP increase in peak power.
Competition Cams CL12-239-3
Xtreme 4x4 218/226 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block; Excellent response, good mid-range, noticeable idle.