Filters
Competition Cams 12-772-8
Xtreme Energy 248/254 Solid Roller Cam for Chevrolet Small Block; Good in weekend warrior with 3000+ stall. Needs good intake and exhaust with low gears.
Competition Cams 1604-1
Ultra Pro Magnum Rocker Arm w/ 1.52 Ratio for Chevrolet V6 and SBC w/ 7/16" Stud; This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, this rocker fits Chevrolet Small Block and V6 with a 7/16" diameter stud.
Competition Cams 21-672-4
Nostalgia Plus 247/254 Hydraulic Flat Cam for Chrysler 383-440; Strong bracket/street cam. 10:1 compression. 3500+ stall. Excellent replacement for the 509 cam.
Competition Cams 32-421-8
Magnum 215/215 Hydraulic Roller Cam for Ford 351C, 351M-400M; Mild street performance. Slightly noticeable lope at idle. Will work with stock converter or even better with 1800+ stall and gear upgrade.
Competition Cams 35-601-4
Mutha' Thumpr 235/249 Hydraulic Flat Cam for Ford 351W; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams 69-246-4
High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6; Performance cam for the street. Mild choppy idle. Likes lower gears.
Competition Cams 751-1
10 Degree Steel Retainer for 983 Spring; Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for engines using our 983 Ovate Wire valve spring.
Competition Cams 7944-16
Hi-Tech 7.250" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.250" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8307-1
Hi-Tech Oil Restricting 7.400" Long, .080" Wall, 5/16" Diameter Pushrod; With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 7.400" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 8546-16
Hi-Tech One-Piece 9.700" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 9.700" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8711-16
Hi-Tech 10.300" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.300" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 948-1
Race Extreme 1.660" OD Triple Spring, 2.100" Installed Height, 1 Spring; Engine Valve Spring