Filters
Competition Cams 4124-116-16
This set of 16 .116" thick XD-A Pushrod Shims are perfect for helping to achieve the proper length of your XD-A Adjustable Pushrods.
Competition Cams 42140518201
PUSHROD, XTREME RACE G2 9.550" LENGTH 3/8" DIA .136" WALL 210 RADIUS SINGLE; Xtreme Race G2 Pushrod, 9.550 Inch Length, 0.375 Diameter, 210 Radius, 4130 Chromoly, Single
Competition Cams 535-32
Valve Stem Oil Seals Viton Seal '03-'10 Ford 6.0/6.4L Powerstroke; (32) Valve Seals: for 7mm Valves and .512 Guides
Competition Cams 08-1001
Hydraulic Roller Installation Kit for '91-'02 Chevrolet Small Block/'91-'97 LT1; Our hydraulic roller lifter installation kit provides a complete, convenient solution for the installation of hydraulic roller lifters into '91-'02 Chevrolet Small Blocks and '91-'97 LT1 w/ OE hydraulic roller camshafts.
Competition Cams 113150
Xtreme Energy 204/200 Hydraulic Roller Cams for GM Ecotec 2.2L; Turbo applications, wide power range, good power with few modifications.
Competition Cams 12-773-8
Xtreme Energy 254/260 Solid Roller Cam for Chevrolet Small Block; Best for Pro Street. Needs good intake and exhaust, 11:1+ compression and 3500 stall.
Competition Cams 1604-12
Ultra Pro Magnum Rocker Arm Set w/ 1.52 Ratio for Chevrolet V6 w/ 7/16" Stud; These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, these rockers fit Chevrolet V6 with a 7/16" diameter stud.
Competition Cams 19012-1
Ultra ARC Break-In Rocker w/ 1.3 Ratio for Chevrolet SBC w/ 7/16" Stud; Perfect for initial break-in, this Ultra ARC rocker for Chevrolet Small Block reduces valve lift by limiting the rocker ratio to 1.3. A great asset to engine builders who prefer to limit the valve lift over removing an inner spring.
Competition Cams 217
Two-Piece Billet Aluminum Timing Cover for Chevrolet Big Block GEN VI; Eliminate timing cover flex and erratic ignition timing with our two-piece billet aluminum timing cover for Chevrolet GEN VI Big Block. Our cover allows for cams to be replaced without disturbing the oil pan seal.
Competition Cams 32-431-8
Magnum 224/224 Hydraulic Roller Cam for Ford 351C, 351M-400M; Great in street machines. Best above 3500+ RPM. Good torque. Largest cam with stock heads and intake. Needs 2000+ stall.
Competition Cams 35-601-8
Mutha' Thumpr 235/249 Hydraulic Roller Cam for Ford 351W; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams 4630-1
1.125" Tall Polylock for High Energy Rockers w/ 7/16" Stud; This 1.125" tall polylock fits our 7/16" High Energy Die Cast Aluminum roller rocker arms. Perfect for moderate lift and spring pressure applications.
