Filters
Competition Cams 19029-16
Ultra ARC Rocker Set w/ 1.82 Ratio for Pedestal Mount GM LS3/L92; Constructed in the USA after FEA analysis, the Ultra ARC rocker withstands up to 700 lbs pressure while improving power and stability. These 19029 rockers feature a 1.82 ratio for use with pedestal mount Chevrolet LS3/L92.
Competition Cams 23-229-4
Xtreme Energy 295HL Hydraulic Flat Camshaft for Chrysler 383-440; Xtreme Energy 295/307 Hydraulic Flat Tappet Camshaft
Competition Cams 46-535-9
Tri-Power Xtreme 210/218 Hydraulic Roller Cam for GM 8100/8.1L; Optimized horsepower with good torque and average fuel economy.
Competition Cams 4802-6
Raised 1 Piece Guide Plate Set Chevrolet w/ 3/8" Pushrod 7/16" Stud; Raised 1 Piece Guide Plate Set Chevrolet Small Block with 3/8" Pushrod 7/16" Stud
Competition Cams 602-12
Hardened Steel Set of 12 - 7 Degree, 3/8", 2 Groove Street Locks for Chrysler; 3/8", 2 Groove Street Lock for Chrysler - Set of 12
Competition Cams 702-1
7 Degree Titanium Retainer for Ford 4.6L 3 Valve/5.0 Coyote w/ Beehive Spring; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 7 degree retainer fits Ford 4.6L 3 Valve/ 5.0 Coyote with our Beehive valve springs.
Competition Cams 754-16
7 Degree Titanium Retainer Set of 16 for 26921 Spring w/ 8mm Valve Stem; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit 8mm valve engines with our 26921 valve spring.
Competition Cams 7787-1
Hi-Tech 9.200" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.200" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 795-1
10 Degree Steel Retainer for 26120 Beehive Spring; Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for engines using our 26120 Beehive valve spring.
Competition Cams 8313-1
Hi-Tech Oil Restricting 6.900" Long, .080" Wall, 5/16" Diameter Pushrod; With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 6.900" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 858-1
Pro Magnum Hydraulic Flat Lifter for SBC/BBC, 194-292/200-262 V6.; This Pro Magnum hydraulic lifter is designed to perform at higher RPM without any harmful pumping up. This lifter for Chevrolet 194-292/200-262 V6, 265-400/396-454/348-409 yields significant power increase over standard hydraulic lifters.
Competition Cams 8716-16
Hi-Tech 10.550" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.550" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.