Filters
Competition Cams 08-417-8
Xtreme Marine 218/224 Hydraulic Roller Cam for OE Roller SBC; Largest for inboard/outboard, very good mid-range.
Competition Cams 11-336-4
Marine 253/260 Hydraulic Flat Cam for Chevrolet Big Block 396-454; B impeller in jet boat. River drags and brackets. Use tunnel ram.
Competition Cams 12-326-4
Magnum 236/236 Hydraulic Flat Cam for Chevrolet Small Block; Needs 9:1 compression, 2800+ stall, headers, gears. Choppy idle.
Competition Cams 12-818-9
Drag Race 277/296 Solid Roller Cam for Chevrolet Small Block; Comp Eliminator or Fast Bracket with 1.8 and 1.7.
Competition Cams 1617-12
Ultra Pro Magnum Self-Aligning Rocker Arm Set w/ 1.52 Ratio for V6 w/ 3/8" Stud; These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, these rockers fit '88+ Chevrolet V6 with a 3/8" diameter stud.
Competition Cams 19044-1
Ultra ARC Rocker w/ 1.6 Ratio Ford 289-351W and Olds V8 w/ 7/16" Stud; Constructed in the USA after FEA analysis, the Ultra ARC rocker withstands up to 700 lbs pressure while improving power and stability. This 19044 rocker features a 1.6 ratio for use with 7/16" stud Ford 289, 302 and 351 Windsor.
Competition Cams 23-232-4
Xtreme Energy 244/252 Solid Flat Cam for Chrysler 383-440; Very strong mid and upper RPM power. 10:1 compression with 3000+ stall.
Competition Cams 32-651-8
Magnum 245/245 Hydraulic Roller Cam for Ford 351C, 351M-400M; Street/strip only. 4 speed or 3000+ stall and 4.10 or lower gear. Higher compression, aftermarket intake and headers.
Competition Cams 4803-8
Raised 1 Piece Guide Plate Set for Ford Cleveland w/ 5/16" Pushrod, 7/16" Stud; Hardened and black oxide coated for durability, this raised one-piece guide plate set is designed for Ford Cleveland engines with 7/16" studs and 5/16" pushrods.
Competition Cams 703-12
10 Degree Steel Retainer Set of 12 for 26095 Beehive Spring; Steel Retainers: 1.185" Spring Diameter
Competition Cams 7788-16
Hi-Tech 9.250" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.250" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.