Filters
Competition Cams 7951-16
Hi-Tech 8.680" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.680" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8314-16
Hi-Tech Oil Restricting 6.950" Long, .080" Wall, 5/16" Diameter Pushrod Set; With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 6.950" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 859-1
Endure-X Solid Roller Lifter for Pontiac 350-455; Endure-X Solid Roller Lifter: Pontiac V8 350-455
Competition Cams 8718-1
Hi-Tech 10.650" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.650" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 96-200-4
High Energy 206/206 Hydraulic Flat Cam for Buick 400, 430, 455; Good performance upgrade for stock camshaft. Great torque and mileage in 400 with stock gear ratio, smooth idle.
Competition Cams 98500R-4
Race XD 0.160" Right Offset Pushrod Seat Set for 0.842"/0.875" Diameter Lifters; Race XD Solid Roller Lifters are the most modular solid roller lifters available thanks to these offset seats. Designed for 0.842"/0.875" diameter Race XD Lifters, this set of four seats offsets the pushrod location to the right by 0.160".
Competition Cams CL12-365-4
XFI 216/223 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block; Good low end and mid-range for TPI 350 with aftermarket chip and upgraded exhaust.
Competition Cams CL33-244-4
Magnum 224/224 Solid Flat Cam and Lifter Kit for Ford 352-428; Good for street driving. Will work with stock manifolds and coverter, best wtith 1800+ stall. Mild rough idle.
Competition Cams CL92-203-4
High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for Buick 350; Good performance camshaft in daily driven vehicles. Slightly choppy idle. Likes headers and 3.40-3.70 gears.
Competition Cams K11-551-5
Magnum Marine 242/250 Solid Flat Cam K-Kit for Chevrolet Big Block 396-454; Jet boat with A or B impeller. Skiing, pleasure, performance.
Competition Cams K31-335-4
Magnum 248/248 Solid Flat Cam K-Kit for Ford 221-302; Great for street/strip. 4 speed or automatic with 3500+ stall. Intake, headers, low gears, very rough idle, 10:1 compression.
Competition Cams K54-412-11
XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV; Good torque and very strong mid-range power. Good performance cam.
