Filters
Competition Cams 19045-1
Ultra ARC Rocker w/ 1.73 Ratio for Ford 351C, 429-460 w/ 7/16" Stud; Constructed in the USA after FEA analysis, the Ultra ARC rocker withstands up to 700 lbs pressure while improving power and stability. This 19045 rocker features a 1.73 ratio for use with 7/16" stud Ford 351C and 429-460.
Competition Cams 4657-1
Hi-Tech Polylock for 1/2" Stud Ultra Pro Magnum Rockers; The best polylock for high end race applications, this Hi-Tech polylock is designed for 1/2" Ultra Pro Magnum and Ultra Pro Magnum XD rockers.
Competition Cams 519-1
1 Metal Body Viton Valve Seal for .500" Guide Size, 5/16" Valve Stem; Providing the best sealing properties and spring clearance, viton valve seals are an excellent choice in performance applications. The 519 seal has a .545" OD and fits applications with 5/16" valves and .500" OD guides.
Competition Cams 6023-1
Sportsman Exhaust Valve for Chevrolet Big Block w/ 1.880" Head, 5.454" Length; Exhaust 1.880 x 11/32 +.100 Long
Competition Cams 705-1
10 Degree Steel Retainer w/ +.050" Installed Height for 26095 Beehive Spring; Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for engines using our 26095 Beehive valve spring. Raises installed height 0.050" over 703 retainer.
Competition Cams 7789-16
Hi-Tech 9.300" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.300" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 859-2
Endure-X Solid Roller Lifter Pair for Pontiac 350-455; Endure-X Solid Roller Lifters for Pontiac 350-455, .842" Diameter, Centered - Pair
Competition Cams 8719-1
Hi-Tech 10.700" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.700" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 96-203-4
High Energy 218/218 Hydraulic Flat Cam for Buick 400, 430, 455; High performance cam for everyday driving. Broad powerband. Slightly rough idle in 400, smooth to noticeable idle in 455.
Competition Cams 98501R-4
Race XD 0.080" Right Offset Pushrod Seat Set for 0.842"/0.875" Diameter Lifters; Race XD Solid Roller Lifters are the most modular solid roller lifters available thanks to these offset seats. Designed for 0.842"/0.875" diameter Race XD Lifters, this set of four seats offsets the pushrod location to the right by 0.080".
Competition Cams CL12-367-4
XFI 236/241 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block; Good mid-range with exceptional top end. Requires chip, gear, plenum and exhaust mods. 2500+ stall.
Competition Cams CL33-246-4
Magnum 248/248 Solid Flat Cam and Lifter Kit for Ford 352-428; Good for street/strip cars. Use 10:1+ compression, low gears, 3000+ stall or 4 speed. Very rough idle.
