Filters
Competition Cams 11-611-5
Drag Race/Puller and Mud Race 260/270 Solid Flat Cam Chevrolet Big Block 396-454; Excellent choice for 427-454c.i., good power, 11:1+ compression.
Competition Cams 3110TB
.142" Thick Roller Thrust Bearing for Chevrolet 396-454 Big Block; Eliminate wear at the front of your Chevrolet 396-454 Block with our moly-coated roller thrust bearing. Our unique design is .142" thick and aids in setting the proper cam thrust clearance while eliminating gear to block wear.
Competition Cams K33-234-4
Xtreme Energy 212/218 Hydraulic Flat Cam K-Kit for Ford 352-428; Strong torque through low and mid-range. Good economy. Mild idle.
Competition Cams 4700-16
OD Spring Locator Set of 16 - 1.670" OD, .640" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4700 features a 1.670" OD with a .640" ID that works with a number of our valve springs.
Competition Cams 4862-16
ID Spring Locator Set of 16 - 1.270" OD, .520" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID.
Competition Cams 4009
Solid Rocker Arm Stud Girdle for Chevrolet 265-400 Small Block w/ 7/16" Stud; Constructed from 6061-T6 aluminum this solid bar stud girdle set for 7/16" stud Chevrolet 265-400 Small Block ties rocker studs together and properly locates them. Kit includes hex adjusting nuts, set screws and installation hardware.
Competition Cams 972-16
Engine Valve Spring Kit; Single Outer Valve Springs: 1.460" OD, 1.060" ID
Competition Cams 17005-16
High Energy Aluminum 1.6 Ratio Roller Rocker Set for SBC 265-400 w/ 7/16" Stud; With a needle bearing fulcrum and a roller tip, our die cast aluminum rockers decrease friction and improve horsepower. Featuring a 1.6 ratio, these rockers fit Chevrolet 265-400 Small Blocks w/ 7/16" studs.
Competition Cams 7826-16
High Energy 6.248" Long, 5/16" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 6.248" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for '85+ Ford 302 with OE hydraulic roller cams.
Competition Cams 4868-16
ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .050" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID.
Competition Cams 7651-16
Magnum 8.680" Long, .080" Wall, 5/16" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 8.680" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 4704-16
OD Spring Locator Set of 16 - 1.570" OD, .640" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4704 features a 1.570" OD with a .640" ID that works with a number of our valve springs.