Filters
Competition Cams 8650-16
Straight 9.850" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.850" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Howards Cams 95208-1
Engine Push Rod; Performance Series C1010 Pushrod; 3/8 7.950 .060 Wall
Edelbrock 9666
Pushrod Guide Plate for B/B Chevy; Edelbrock part #9666 Guide Plate is made from high-grade alloy steel and hardened to 60 Rockwell "C". Stepped plates support pushrods closer to the rockers stabilizing them. Sold in sets of 8.
PRW Power 94080319500
Pushrods, 3/8" High-Tech Swedged Chromoly, .080" Wall, Length 9.500", 16 Each; 16 pc.
Pioneer Automotive Industries, LLC PR-356-4
Pioneer Automotive Industries Push Rod. Designed as a direct OEM replacement for reliable engine performance.
Howards Cams 95209
Engine Push Rod Set; Performance Series C1010 Pushrod Kit; Ford 351W 3/8 8.000 .060 Wall
Edelbrock 9667
Pushrod Guide Plate for Pontiac; Edelbrock part #9667 Guide Plate is made from high-grade alloy steel and hardened to 60 Rockwell "C". Stepped plates support pushrods closer to the rockers stabilizing them. Sold in sets of 8.
PRW Power 94080319800
Pushrods, 3/8" High-Tech Swedged Chromoly, .080" Wall, Length 9.800", 16 Each; 16 pc.
Competition Cams 7854-16
High Energy 8.280" and 9.252" Long, 3/8" Diameter Pushrod Set; Exceeding OE specifications, this High Energy pushrod set works perfectly with High Energy or Magnum rockers. Factory length for '65-'86 Chevrolet 396 Big Block.
Competition Cams 8461-1
Hi-Tech One-Piece 8.280" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 8.280" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8651-1
Straight 9.900" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.900" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
