Browse Catalog

Straight 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 8.050" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.

XD-A 7.740 to 7.972 Inch Adjustment Range Pushrod Set; Featuring a 90% increase in bending stiffness, these XD-A pushrods can be adjusted from 7.740" to 7.972" and allow for the use of lightweight rockers. .004" incremental adjustment is perfect for setting pre-load or lash.

Flat 1 Piece Guide Plate Set of 6 for Olds 350-455 w/ 5/16" Pushrod 5/16" Stud; Flat 1 Piece Guide Plate Set for Oldsmobile 350-455 with 5/16" Pushrod and 5/16" Stud

Magnum 7.15" Long, .080" Wall, 5/16" Diameter Pushrod Set 12; Magnum Pushrods: 5/16" Diameter, 7.150" Length-1

High Energy 8.280" Long, 3/8" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 8.280" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for Chevrolet 396-454 Big Block intake valves.

Hi-Tech 8.780" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.780" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.

Straight 8.100" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 8.100" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.

Magnum 8.280" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8; Magnum 8.280" Long, .080" Wall, 3/8" Diameter Pushrod - Set of 8

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 7.150" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.

Hi-Tech 8.780" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8; Hi-Tech 8.780" Long, .080" Wall, 3/8" Diameter Pushrod - Set of 8

Straight 8.100" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 8.100" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.

XD-A 7.950 to 8.182 Inch Adjustment Range Pushrod; Featuring a 90% increase in bending stiffness, this XD-A pushrod can be adjusted from 7.950" to 8.182" and allows for the use of lightweight rockers. .004" incremental adjustment is perfect for setting pre-load or lash.