Refine Results

Reset

0.47 in. (1)

0.66 in. (1)

0.731 in. (1)

0.732 in. (1)

0.739 in. (1)

0.74 in. (1)

0.76 in. (1)

0.772 in. (1)

0.78 in. (1)

0.794 in. (1)

0.795 in. (5)

0.8 in. (5)

0.811 in. (1)

0.825 in. (2)

0.827 in. (1)

0.85 in. (1)

0.865 in. (8)

0.875 in. (4)

0.877 in. (1)

0.89 in. (1)

0.897 in. (1)

0.902 in. (1)

0.906 in. (1)

0.91 in. (1)

0.912 in. (1)

0.917 in. (1)

0.921 in. (1)

0.95 in. (2)

0.962 in. (1)

0.972 in. (1)

0.975 in. (4)

0.98 in. (1)

0.982 in. (1)

0.99 in. (4)

0.998 in. (1)

1.015 in. (1)

1.023 in. (2)

1.03 in. (3)

1.035 in. (8)

1.043 in. (1)

1.061 in. (1)

1.075 in. (4)

1.08 in. (1)

1.115 in. (4)

1.125 in. (3)

1.133 in. (1)

1.144 in. (2)

1.152 in. (1)

1.155 in. (1)

1.183 in. (1)

1.19 in. (1)

1.2 in. (14)

1.22 in. (1)

1.225 in. (6)

1.235 in. (11)

1.236 in. (1)

1.24 in. (7)

1.25 in. (4)

1.26 in. (1)

1.275 in. (1)

1.3 in. (4)

1.31 in. (1)

1.325 in. (4)

1.33 in. (1)

1.338 in. (1)

1.35 in. (4)

1.36 in. (4)

1.365 in. (6)

1.37 in. (1)

1.375 in. (12)

1.38 in. (8)

1.4 in. (21)

1.407 in. (1)

1.43 in. (2)

1.44 in. (6)

1.45 in. (20)

1.46 in. (2)

1.475 in. (14)

1.48 in. (10)

1.495 in. (1)

1.5 in. (5)

1.57 in. (1)

Steel (208)

Titanium (109)

10 Degree (70)

6 Degree (6)

7 Degree (80)

8 Degree (64)

Beehive (51)

Standard (73)

0.214 in. (1)

0.236 in. (1)

0.244 in. (1)

0.252 in. (1)

0.256 in. (2)

0.259 in. (1)

0.28 in. (1)

0.283 in. (1)

0.291 in. (1)

0.292 in. (1)

0.297 in. (1)

0.308 in. (1)

0.309 in. (1)

0.312 in. (1)

0.317 in. (1)

0.322 in. (1)

0.323 in. (1)

0.325 in. (1)

0.328 in. (1)

0.335 in. (1)

0.348 in. (1)

0.362 in. (1)

0.386 in. (2)

0.4 in. (1)

0.413 in. (1)

0.417 in. (1)

0.45 in. (1)

0.59 in. (1)

0.594 in. (1)

0.635 in. (1)

0.64 in. (1)

0.65 in. (1)

0.675 in. (2)

0.68 in. (1)

0.69 in. (1)

0.697 in. (1)

0.725 in. (1)

0.75 in. (1)

0.792 in. (2)

0.828 in. (1)

0.83 in. (1)

0.873 in. (1)

1 in. (1)

1.056 in. (1)

1.058 in. (1)

1.207 in. (1)

1.236 in. (1)

1.275 in. (1)

1.7 in. (1)

Double (141)

Single (72)

Triple (10)

0.234 in. (1)

0.235 in. (1)

0.243 in. (1)

0.256 in. (1)

0.272 in. (1)

0.276 in. (1)

0.277 in. (1)

0.283 in. (1)

0.291 in. (1)

0.292 in. (1)

0.311 in. (3)

0.314 in. (2)

0.315 in. (3)

0.316 in. (1)

0.32 in. (1)

0.326 in. (1)

0.334 in. (1)

0.335 in. (1)

0.341 in. (1)

0.342 in. (1)

0.345 in. (1)

0.37 in. (1)

0.372 in. (1)

0.375 in. (6)

0.39 in. (2)

0.393 in. (2)

0.395 in. (1)

0.402 in. (1)

0.43 in. (2)

0.441 in. (1)

0.454 in. (1)

0.515 in. (1)

0.521 in. (1)

0.546 in. (1)

0.55 in. (1)

0.551 in. (2)

0.575 in. (4)

0.585 in. (2)

0.59 in. (3)

0.6 in. (7)

0.61 in. (2)

0.615 in. (2)

0.63 in. (2)

0.635 in. (8)

0.64 in. (9)

0.65 in. (7)

0.669 in. (4)

0.675 in. (6)

0.68 in. (4)

0.685 in. (6)

0.69 in. (2)

0.695 in. (10)

0.7 in. (4)

0.71 in. (10)

0.715 in. (22)

0.735 in. (8)

0.755 in. (2)

0.76 in. (2)

0.77 in. (2)

0.78 in. (6)

0.785 in. (4)

0.787 in. (2)

0.8 in. (2)

0.802 in. (4)

0.815 in. (2)

0.84 in. (4)

0.855 in. (1)

0.865 in. (1)

0.963 in. (2)

1 in. (2)

1.06 in. (3)

1.075 in. (2)

1.135 in. (2)

Sold Individually (216)

Sold as a Kit (138)

+0.050 sportsman drag race/circle track (4)

+0.050 sportsman retainer for all 1.050 ID dual drag springs (2)

+0.050 sportsman triple spring drag race (4)

5.0 Liter Coyote titanium retainer (2)

Accessible exact result confirms part identity as Melling steel valve spring retainer, but usable dimensional specs were not exposed in accessible source text. (1)

Fits PAC-1214 and 1214X; Gen 2 Mini Cooper (1)

Fits PAC-1217/1234/1281 (2)

Fits PAC-1225/1325/1243/1561 (2)

Fits PAC-1226 and 1326 (2)

Fits PAC-1240/1340/1540 (2)

Fits PAC-1243/1245/1343 (2)

Fits PAC-1244 and 1344 (2)

Fits PAC-1282 spring; Ford Godzilla 7.3L (4)

Fits PAC-1312 and 1312L; Ford Mod Motor A (2)

Fits PAC-1341 (2)

Fits PAC-1342/1386/1396 (2)

Fits PAC-1372 (2)

Fits PAC-1372 , Mini 8 Degree Locks (2)

Fits PAC-1373 (2)

Fits PAC-1392 (2)

Fits PAC-1900 (2)

Fits PAC-1901/1916/1918/1924/1940 (2)

Fits PAC-1902 (2)

Fits PAC-1903 (2)

Fits PAC-1906 (2)

Fits PAC-1908 (2)

Fits PAC-1914 (2)

Fits PAC-1933 (2)

For use in Top Fuel 7 Degree - dual spring (2)

For use in Top Fuel 7 Degree - triple spring (2)

Ford Mod Motor (6)

Ford Mod Motor; +0.060 install height retainer (2)

Heavy duty top for abusive Top Alcohol engines - dual (4)

I could not verify this exact Pioneer part number from authoritative sources during this pass, so all spec fields remain blank. (1)

JEGS exact part page lists ID 0.546 in, OD 1.152 in, material steel, and outside clip style. Quantity marked 1 from retail "each" listing. (1)

Light weight steel retainer for 1200-1201 spring (2)

Light weight steel version of R335 LS RPM dual spring (2)

Melling archive announcement confirms VSR-710 as a valve spring retainer for GM 4.3L, 5.0L and 5.7L engines, but accessible source did not expose detailed dimensional specs. (1)

Melling/OReilly exact result identifies VSR-717 as a steel valve spring retainer. Separate Melling archive search confirms this part was announced for GM 6.6L OHV applications. (1)

Mini 8 tool steel retainer for all 1.050 ID dual springs , Mini 8 Degree Locks (2)

OReilly exact part page lists OD 1.495 in and unit of measure each; Melling official spec chart states these retainers are manufactured for 7 degree valve locks. (1)

OReilly title says Melling steel valve spring retainer while the URL slug references stainless steel; material kept as steel from the displayed product title and conflict noted. (1)

Official Melling release for VSR-720 identifies Chrysler 2.0L and 2.4L SOHC applications and states quantity required 16; this appears to be application quantity, not pack quantity. (1)

Official Melling release for VSR-721 identifies GM 6.6L OHV diesel applications and states quantity required 32; this appears to be application quantity, not pack quantity. (1)

Official Melling release for VSR-722 identifies GM 1.2L, 1.3L, 1.4L and 1.5L DOHC applications and states quantity required 16. (1)

Official Melling release for VSR-723 identifies GM 2.0L, 2.5L, 2.7L, 3.2L, 3.6L and 4.2L DOHC applications and states quantity required 24. (1)

Official Melling release for VSR-724 identifies Ford/Lincoln/Mercury 3.3L, 3.5L and 3.7L DOHC applications and states quantity required 24. (1)

Official Melling release for VSR-726 identifies Lexus/Scion/Toyota DOHC applications and states quantity required 24; Intake and Exhaust. (1)

Official Melling release for VSR-728 identifies Lexus/Scion/Toyota 1.3L, 1.8L, 2.5L, 2.7L, 3.0L, 3.3L and 4.0L DOHC applications and states quantity required 24; Intake and Exhaust. (1)

Official Melling release for VSR-730 identifies Acura/Honda 3.0L and 3.5L SOHC applications and states quantity required 24. (1)

Official Melling release page confirms VSR-725 is a valve spring retainer for Ford 1.0L, 1.5L and 1.6L DOHC applications. Detailed PDF/spec values were not accessible from search results used here. (1)

Official Melling release page confirms VSR-727 is a valve spring retainer for Lexus/Toyota 2.5L, 3.5L, 4.0L, 4.6L, 5.0L and 5.7L DOHC applications. (1)

Official Melling release page confirms VSR-729 is a valve spring retainer for Acura/Honda 1.3L, 1.5L, 1.8L and 2.0L applications. (1)

Official Melling spec chart lists 475024 under 11/32 in valve stems with diameters 1.375/1.075/.785; only the first diameter was mapped to outer spring OD. (1)

Official Pioneer retainer table lists 817100 as 11/32 in stem retainer with A/B/C dimensions 1.240/0.865/0.680. Footnote (1) states 1.700 in installed height. Packaged 16/card. (1)

Official Pioneer retainer table lists 817102 as 11/32 in stem retainer with A/B/C dimensions 1.375/1.060/0.675. Footnote (3): 0.040 in taller installed height than 817100. Used with both single and dual springs in the official spring table, so spring styl (1)

Official Pioneer retainer table lists 817104 as 11/32 in stem retainer with A/B/C dimensions 1.375/1.075/0.792. Footnote (4): 0.100 in taller installed height than 817100. Used with both single and dual springs in the official spring table, so spring styl (1)

Official Pioneer retainer table lists 817105 as 3/8 in stem retainer with A/B/C dimensions 1.375/1.075/0.792. Footnote (5): 0.100 in taller installed height than 817103. Used with both single and dual springs in the official spring table, so spring style/ (1)

Official Pioneer retainer table lists 817111 for Chevy small-block Vortec with 810109 valve spring, A/B dimensions 1.030/0.640, 11/32 in stem. Footnote (1) states 1.700 in installed height. Packaged 16/card. (1)

Official Pioneer spring/retainer tables pair 817103 with 810012 single w/damper spring for Chrysler small-block V8. Retainer A/B/C dimensions 1.375/1.060/0.675. Installed height not stated directly on retainer page. (1)

Official Pioneer spring/retainer tables pair 817106 with 810103 single w/damper spring for Chrysler big-block V8. Retainer A/B/C dimensions 1.500/1.135/0.635. Footnote (6): 0.110 in taller installed height than 817103. (1)

Official Pioneer spring/retainer tables pair 817107 with 810202 dual spring. Official retainer table dimensions A/B/C 1.500/1.135/0.725, 3/8 in stem, 7 degree, and footnotes (7)(8): 0.180 in taller installed height than 817103 and must use 816142 valve lo (1)

Official Pioneer spring/retainer tables pair 817108 with 810107 and 810108 single w/damper springs. Retainer A/B/C dimensions 1.125/0.855/0.640. Footnote (9): 0.075 in taller installed height than 817100. (1)

Official Pioneer spring/retainer tables pair 817109 with 810109 single conical LS1 spring. Official retainer table lists 8 mm stem. Summit filtered result for exact part family exposes 1.030 in outside diameter, 0.650 in inside diameter, steel, 7 degree, (1)

Official Pioneer spring/retainer tables pair 817110 with 810206 dual spring and 816175 10 degree locks. Retainer A/B/C dimensions 1.400/1.060/0.690, 11/32 in stem. Footnote (4): 0.100 in taller installed height than 817100. Summit exact page confirms part (1)

RPM series dual springs (Mini 8 locks) (4)

Retainer for 1215, 1218, 1219, 1220 and other beehives (2)

Retainer for 1218, 1220 and others with standard 7 degree lock (2)

Retainer for 1218, 1220, and others with FMOD locks (2)

Retainer for 1255, 1295, 1595 (2)

Steel LS retainer for 1221, 1521 (2)

Steel beehive LS retainer for 1218 and more (2)

Steel retainer for 1200-1201 (2)

Steel retainer for 1202, 1203 (2)

Steel retainer for 1222X LS spring (2)

Steel retainer for 1371 (2)

Steel retainer for 1371 spring , Mini 8 Degree Locks (2)

Steel retainer for LS RPM series duals (2)

Steel retainer for marine applications (2)

Summit describes 475044 as sold each; official Melling spec chart provides diameters and 7 degree lock note. (1)

Super Stock only (2)

Ti retainer for 1.175 series dual springs (2)

Ti retainer for 1225, 1325, 1243, 1561 dual springs (2)

Ti retainer for 1226, 1326 dual springs (2)

Ti retainer for 1227, 1239, 1254, 1297, 1509 dual springs (2)

Ti retainer for 1298, 1299 dual springs (2)

Ti retainer for 1371 dual spring (2)

Ti retainer for 1385, 1395 dual springs (2)

Ti retainer for LS dual springs, 1221, 1521 (2)

Ti retainer for all 1.050 ID dual springs (4)

Titanium Ford Mod Motor for 1512 spring (2)

Titanium LS retainer for 1221, 1521 (2)

Titanium LS retainer for 1530, 1335 , Mini 8 Degree Locks (2)

Titanium beehive LS retainer for 1218 and more (2)

Titanium retainer for 1222X spring (2)

Titanium retainer for LS RPM series duals (2)

Tool steel Pro Drag Race for 1376 spring (DLC option) , Mini 8 Degree Locks (2)

Tool steel Pro Series for 1326 spring (DLC option) , Mini 8 Degree Locks (2)

Tool steel Pro Series race for 1341 spring (DLC option) , Mini 8 Degree Locks (2)

Tool steel Pro Series race for 1373 spring (DLC option) , Mini 8 Degree Locks (2)

Tool steel retainer for 1222X spring (2)

Tool steel retainer for 1226, 1326 dual springs (4)

Tool steel retainer for 1227, 1239, 1254, 1297, 1509 duals (2)

Tool steel retainer for 1385, 1395 dual springs (4)

Tool steel retainer for 1530, 1335 dual springs , Mini 8 Degree Locks (2)

Tool steel retainer for LS dual springs, 1221, 1521 (2)

Tool steel retainer for all 1.050 ID dual springs (4)

Tool steel retainer for triple drag race springs (4)

Ultra lightweight steel for PAC-1295 / 1295X / 1595 spring , Mini 8 Degree Locks (2)

Ultra lightweight steel for Super Stock 1409 spring (2)

Ultra lightweight steel for Super Stock 1427 spring , Mini 8 Degree Locks (2)

V-Rod (4)

V-Rod Destroyer (2)

Valve spring retainer, valve stem diameter 0.234/0.235, outside/steps 0.982/0.590/0.484. (1)

Valve spring retainer, valve stem diameter 0.235, outside/steps 0.962/0.697/0.491. (1)

Valve spring retainer, valve stem diameter 0.272/0.273, outside/steps 0.897/0.594/0.544. (1)

Valve spring retainer, valve stem diameter 0.311/0.312, outside/steps 1.144/0.828/0.572. (1)

Valve spring retainer, valve stem diameter 0.311/0.312, outside/steps 1.144/0.830/0.562. (1)

Valve spring retainer, valve stem diameter 0.315, outside/steps 1.080/0.750/0.612. (1)

Valve spring retainer, valve stem diameter 0.315/0.316, outside/steps 1.275/0.958/0.570. (1)

Valve spring retainer, valve stem diameter 0.316, outside/steps 1.310/0.873/0.760. (1)

Valve spring retainer, valve stem diameter 0.341/0.342, outside/steps 1.236/0.862/0.675. (1)

Valve spring retainer, valve stem diameter 0.342, outside/steps 1.370/1.056/0.665. (1)

Valve spring retainer, valve stem diameter 0.370/0.373, outside/steps 1.330/1.000/0.600. (1)

Valve spring retainer, valve stem diameter 0.372, outside/steps 1.407/1.058/0.900. (1)

Valve spring retainer, valve stem diameter 0.430/0.431, outside/steps 1.570/1.207/0.840. (1)

PAC Racing Springs

Competition Cams

Ferrea Racing Components

Melling Engine Parts / Melling Tool Co.

Howards Cams

Reliance Power Parts

Melling Select Performance

Edelbrock

Dart

Pioneer Automotive Industries, LLC

Dura-Bond Bearing Company

{DELETED} Lunati LLC

Manley

Filters

Browse Catalog

Catalog
Camshafts and Valvetrain
Valve Spring Retainers
All Brands
All Series

907 results

Sort by

Show Universal In stock only

Melling Engine Parts / Melling Tool Co. VSR-707

Stock Replacement Valve Spring Retainer

Fitment for Part #: VSR-707

Choose a vehicle or an engine to see if this part applies.

Year / Make / Model

Year

Make

Model

Engine

Manufacturer

Engine Family

Engine Size

Ferrea Racing Components E11150

TI RET 1.5L T HON 5.5 21.60

Fitment for Part #: E11150

Model

Engine

Manufacturer

Manufacturer

Engine Family

Engine Size

Competition Cams 713-1

7 Degree Steel Retainer for 8mm Valve Chevrolet LS w/ 26925 Spring; Precision machined from chromemoly steel then black oxided, this 7 degree retainer is designed specifically for GM LS engines using our 26925 dual valve springs.

Fitment for Part #: 713-1

Choose a vehicle or an engine to see if this part applies.

Year / Make / Model

Year

Make

Model

Engine

Manufacturer

Engine Family

Engine Size

Melling Engine Parts / Melling Tool Co. VSR-709

Stock Replacement Valve Spring Retainer

Fitment for Part #: VSR-709

Choose a vehicle or an engine to see if this part applies.

Year / Make / Model

Year

Make

Model

Engine

Manufacturer

Engine Family

Engine Size

13
14
15
16 (current)
17
18
19

Page 16 of 76

Lost Sale

Reason

Note

Enter the competitor name and price.

Notify me when this item is in stock

Products

Categories

Refine Results

Filters

Melling Engine Parts / Melling Tool Co. VSR-707

Ferrea Racing Components E11150

Ferrea Racing Components T10001

Dura-Bond Bearing Company SR-220

PAC Racing Springs PAC-R526-16

Melling Engine Parts / Melling Tool Co. VSR-708

Ferrea Racing Components E11151

Ferrea Racing Components T10002

Dura-Bond Bearing Company SR-318

PAC Racing Springs PAC-R527

Competition Cams 713-1

Melling Engine Parts / Melling Tool Co. VSR-709