Browse Catalog

Pro-Flo Multi-Point Replacement Calibration Module; The Edelbrock 35360 is a new calibration module that will be a replacement or service part for any Pro-Flo kit. Calibration Module now has back lighting and has been updated to be immune to RF and electrical noise.

Pro-Flo 4 Plus EFI Knock Sensor Harness #36145 Chevrolet LS1; This Knock Sensor Harness is an auxillary support item for Pro-Flo 4+ Chevrolet LS1 EFI Systems. This Harness will plug into the Pro-Flo 4+ Chevrolet LS1 Main Engine Harness Connector labeled Knock.

Pro-Flo 4 EFI - ECU & Engine Harness Kit For GEN III 24x LS Engines; Edelbrock Pro-Flo 4 ECU & Harness Kit #35711 is for use with Chevrolet Gen III 24X LS engine installations into non-EFI vehicles. Allows you to retain the LS engine's OEM electronic fuel injection system.

Pro-Flo 4 EFI - ECU & Engine Harness Kit For GEN IV 58x LS Engines; Edelbrock Pro-Flo 4 ECU & Harness Kit #35712 is for use with Chevrolet Gen IV 58X LS engine installations into non-EFI vehicles. Allows you to retain the LS engine's OEM electronic fuel injection system.

1994-95 Mustang Throttle Body Adapter; The 3835 adapter kit is required to install our Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs

The harness is required and sold separately from PF4 LS EFI kit.; The Edelbrock #35713 Ignition/IAC Harness is required when installing a Pro-Flo 4 EFI kit on a Gen III Chevrolet LS 24X engine. This kit sold separately from Pro-Flo 4 LS EFI kit.

Edelbrock Pro-Flo 4 EFI #35670 for Chrysler Gen II 426-572 HEMI; Edelbrock Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Chrysler Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range.

Ultra Low Profile Universal Intake Elbow - 90mm T.B. to 4150 Flange; The Edelbrock 3847 Elbow can be used in square bore (4150 style) manifold applications. It accommodates LS1 80 mm or Edelbrock PN 3864 LS2 (90mm 4-bolt) or Ford style 75mm throttle bodies.

Ultra Low Profile Universal Intake Elbow - 90mm T.B. to 4150 Flange; The Edelbrock PN 3848 EFI Elbow Low Profile Universal 75/85/90mm TB to 4150 Flange

High Flow Intake Elbow (up to 95mm Throttle Body); These elbows were developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. High Flow Intake Elbow 3849 can be used with up to a 95mm Throttle Body.

Pro-Flo 4 EFI XT-Style Kit #35733 For Chevrolet LS Gen III/IV; Edelbrock Pro-Flo 4 XT EFI System for Chevrolet LS GEN III/IV engines. The EFI system comes complete with a Pro-Flo XT cathedral port black finish intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure.

Edelbrock 103mm Throttle Body #38988 for 2015-17 Ford Mustang 5.0L with Modular Inlet Supercharger