Browse Catalog

Checking Springs Pair; Checking springs are essential for any engine project. Whether you're checking piston to valve clearance, rocker ratio, valve lift, degreeing a cam or measuring for pushrod length, checking springs are a necessity.

Cam Phaser Socket Tool for Ford 7.3L Godzilla Engine; The 7.3L Godzilla Cam Phaser Socket Tool #5475 is required to remove the camshaft phaser bolt on Godzilla engines. This sturdy 1/2-inch drive socket is a 22mm, 16-point socket that has been traditionally hard to find.

Set Screw for 5009

Replacement Bolt for Lifter Bore Grooving Tool Insert; Replaces the bolt that is used in our carbide insert in our lifter bore grooving tool.

Pushrod Cleaning Brush - 12" Length

Carbide Insert for Lifter Bore Grooving Tool; This carbide insert replaces the carbide cutter in our lifter bore grooving tool.

Hi-Tech Pushrod Length Checking Set 5.800"-9.800"; Perfect for engine builders, this includes our 7701, 7702, 7703 and 7704 Hi-Tech checking pushrods. Our kit measures from 5.800" to 9.800" in incremements of .050" and eliminates the need for expensive calipers.

Hi-Tech Pushrod Length Checker w/ 5/16" Cup 8.800" to 9.800" Length; Precision-crafted from steel alloy then black oxided, this Hi-Tech checking pushrod is adjustable from 8.800" to 9.800" in .050" increments. Features a 5/16" ball on the lifter end and a 5/16" cup on the rocker end.

Magnum Pushrod Length Checking Set 6.125"-11.500"; This master pushrod checking kit includes our 7905, 7901, 7902, 7903 and 7904 checking pushrods. With this kit, you can measure from 6.125" to 11.500".

Dynomation-6 Wave Action Engine Simulation Software; Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation. Fully analyzes induction runner lengths, port taper angles and head flow, saving engine builders a lot of time.

Professional Two-In-One Harmonic Balancer Puller/Installation Tool; Our Two-in-One harmonic balancer puller/installation tool features a hardened threaded shaft, alloy nut, roller thrust bearing and a black oxide finish. Includes bolts to handle GM, Ford and Chrysler applications.

Professional 16" Diameter Machined Aluminum Camshaft Degree Wheel